Ürünler

PEPPERL+FUCHS UB2000-30GM-E5-V15 ULTRASONIK SENSÖR

Technical Data

General specifications
Sensing range 80 ... 2000 mm
LED green solid: Power-on
flashing: program function object detected
LED yellow solid: switching state switch output
flashing: program function
LED red normal operation: "fault"
program function: no object detected
Electrical specifications
Synchronization bi-directional
0 level -U
B...+1 V
1 level: +4 V...+U
B
input impedance: > 12 KOhm
synchronization pulse:
100 µs, synchronization interpulse
period:
2 ms
Synchronization frequency
Common mode operation
30 Hz
Input type 1 program input,
operating range 1: -U
B ... +1 V, operating range 2: +4 V ...
+U
B
input impedance: > 4.7 k; program pulse: 1 s
Output
Output Switch point A1: 220 mm
Switch point A2: 2100 mm
output function: Window mode
output behavior: NO contact
Compliance with standards and
directives
Standard conformity
Standards EN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
Approvals and certificates


Adjustment range 120 ... 2000 mm
Dead band 0 ... 80 mm
Standard target plate 100 mm x 100 mm
Transducer frequency approx. 180 kHz
Response delay approx. 150 ms
Indicators/operating means
Operating voltage UB 10 ... 30 V DC , ripple 10 %SS
No-load supply current I0 50 mA
Input/Output
Multiplex operation 30 Hz / n , n = number of sensors , n 5
Input
Output type 1 switch output PNP , Normally open/closed , programmable
Rated operating current I
e 200 mA , short-circuit/overload protected
Voltage drop U
d 2.5 V
Repeat accuracy
0.5 % of switching point
Switching frequency f
3.3 Hz
Range hysteresis H 1 % of the set operating distance
Temperature influence < 2 % of far switch point
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 5-pin
Degree of protection IP65
Material
Housing nickel plated brass; plastic components: PBT
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass 140 g
Factory settings
EAC conformity TR CU 020/2011
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated
36 V