Ürünler

PEPPERL+FUCHS SU18-35-40A-110-115A-126A FİBER OPTİK SENSÖR

Technical Data

General specifications
Sensor range up to 460 mm (KLR-C02-2,2-2,0-K146)
Operation indicator LED green, statically lit Power on , Undervoltage indicator:
Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green
flashing (approx. 4 Hz)
Function indicator LED yellow: static illumination switching state, flashes when fal
ling short of the stability control
Control elements Teach-In key
slide switch 2 positions: light/dark switching
slide switch 3 positions: timer function - timer off, on delay 40
ms, off-delay 40 ms
slide switch 3 positions: operating mode - Standard, High Power,
Ultra
Electrical specifications
Operating voltage UB 10 ... 30 V DC
Ripple 10 %
No-load supply current I
0 30 mA
Output
Pre-fault indication output 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
Voltage drop U
d 2 V DC at 100 mA ; 0.7 V at 10 mA
Switching frequency f Standard mode: 3 kHz , High power mode: 1 kHz , Ultra mode:
100 Hz
Response time Standard mode: 160
µs , High power mode: 500 µs , Ultra mode:
5 ms
Repeat accuracy R
0.5 % of adjusted sensor range
Ambient conditions
Ambient temperature -10 ... 55 °C (14 ... 131 °F)
Compliance with standards and directi
ves
Standard conformity
Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates


Detection range up to 1500 mm (KLE-C01-2,2-2,0-K116)
Light source LED
Light type modulated visible red light , 640 nm
Ambient light limit 10000 Lux
Functional safety related parameters
MTTFd 690 a
Mission Time (T
M) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Switching type light/dark on, switchable
Signal output 1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Storage temperature -20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection IP50
Connection 200 mm, PVC cable with M8 connector, 4-pin
Material
Housing PC
Mass 45 g
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approval CCC approval / marking not required for products rated
36 V