|
Technical Data |
General specifications
Effective detection range 0 ... 12 m
| Reflector distance | 0.2 ... 12 m |
| Threshold detection range 15 m |
| Reference target | H50 reflector |
| Light source laser diode |
| Light type | modulated visible red light |
| Polarization filter yes | |
| Laser nominal ratings | |
| Note LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 1 |
| Wave length 680 nm |
| Beam divergence | > 5 mrad d63 < 2 mm in the range 250 ... 750 mm |
| Pulse length 1.6 µs |
| Repetition rate | max. 17.6 kHz |
| max. pulse energy 9.6 nJ |
| Diameter of the light spot | approx. 30 mm at a distance of 12 m |
| Angle of divergence approx. 0.3 ° |
| Ambient light limit | EN 60947-5-2 |
| Functional safety related parameters |
| MTTFd | 672 a |
| Mission Time (TM) 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
Operation indicator LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicator Yellow LED:
Permanently lit—light path clear
Permanently off—object detected
Flashing (4 Hz)—operating reserve not reached
Control elements Light-on/dark-on changeover switch
Control elements sensitivity adjustment
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
| Electrical specifications |
Operating voltage UB 10 ... 30 V DC
Ripple max. 10 %
No-load supply current I0 < 20 mA at 24 V supply voltage
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
| Transfer rate | COM 2 (38.4 kBaud) |
| IO-Link Revision 1.1 |
Min. cycle time 2.3 ms
Process data witdh Process data input 2 Bit
Process data output 2 Bit
SIO mode support yes
Device ID 0x110202 (1114626)
| Compatible master port type | A |
| Output | |
| Switching type | The switching type of the sensor is adjustable. The default set |
ting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed /
light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open /
dark-on
Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
| Usage category | DC-12 and DC-13 |
| Voltage drop Ud ≤ 1.5 V DC |
Switching frequency f 2000 Hz
Response time 250 µs
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 / IP69 / IP69K |
| Connection M8 x 1 connector, 4-pin | |
| Material | |
| Housing PC (Polycarbonate) |
| Optical face | PMMA |
| Mass approx. 10 g |
SOLUTION PARTNER
