|
Technical Data |
General specifications Switching element function PNP NO/NC Rated operating distance sn 20 mm Installation flush Switching frequency f 0 ... 440 Hz Hysteresis H typ. 5 % Voltage drop Ud ≤ 2 V Operating current IL 0 ... 200 mA Off-state current I r 0 ... 0.5 mA No-load supply current I0 ≤ 20 mA Time delay before availability tv 80 ms Operating voltage indicator LED, green may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % Core cross-section up to 2.5 mm2 |
| Compliance with standards and directives Standard conformity Standards EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| Approvals and certificates EAC conformity TR CU 020/2011 CCC approval CCC approval / marking not required for products rated ≤36 V |
Output polarity DC
Assured operating distance sa 0 ... 16.2 mm
Reduction factor rAl 0.33
Reduction factor rCu 0.31
Reduction factor r304 0.74
Reduction factor rBrass 0.38
Nominal ratings
Operating voltage UB 10 ... 30 V DC
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 1230 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 85 °C (-13 ... 185 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross-section
Minimum core cross-section without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-section without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing material PA/metal with epoxy powder coating
Sensing face PA
Housing base plastic
Degree of protection IP68 / IP69K
Mass 225 g
Note Tightening torque: 1.8 Nm (housing)
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
SOLUTION PARTNER
