Technical Data

General specifications
Detection range 5 ... 350 mm
Operating voltage U
B 10 ... 30 V DC
Ripple max. 10 %
No-load supply current I
0 < 20 mA
Switching type The switching type of the sensor is adjustable. The default set
ting is: light on
Signal output 1 PNP output, short-circuit protected, reverse polarity protected,
open collector
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Voltage drop U
d 1.5 V DC
Switching frequency f 500 Hz
Compliance with standards and directi
Directive conformity
Approvals and certificates
UL approval cULus Listed, Class 2 Power Source or listed Power Supply
with a limited voltage output with (maybe integrated) fuse
(max. 3.3 A according UL248), Type 1 enclosure
CCC approval CCC approval / marking not required for products rated
36 V

Detection range min. 5 ... 30 mm
Detection range max. 5 ... 350 mm
Adjustment range 30 ... 350 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated visible red light
Polarization filter no
Black/White difference (6 %/90 %) < 18 % at 350 mm
Diameter of the light spot approx. 20 mm at a distance of 350 mm
Angle of divergence approx. 4 °
Optical face frontal
Ambient light limit EN 60947-5-2:2007+A1:2012
Functional safety related parameters
MTTFd 860 a
Mission Time (T
M) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green: power on
Function indicator LED yellow: lights when object is detected
Control elements Sensing range adjuster
Control elements Light-on/dark-on changeover switch
Electrical specifications
Response time 1 ms
Ambient conditions
Ambient temperature -30 ... 60 °C (-22 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection IP67
Connection connector M8 x 1 , 4-pin
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 10 g
Tightening torque, fastening screws 0.6 Nm
EMC Directive 2004/108/EC EN 60947-5-2:2007+A1:2012
Standard conformity
Standards UL 60947-5-2