Technical Data

General specifications
Detection range 0 ... 1000 mm
ting is: light on
Signal output 1 NPN output, short-circuit protected, reverse polarity protected,
open collector
Switching voltage max. 30 V DC
Switching frequency f 1000 Hz
Response time 0.5 ms
Ambient conditions
Ambient temperature -30 ... 60 °C (-22 ... 140 °F)
Compliance with standards and directi
Directive conformity
Approvals and certificates
UL approval cULus Listed, Class 2 Power Source or listed Power Supply
with a limited voltage output with (maybe integrated) fuse
(max. 3.3 A according UL248), Type 1 enclosure
CCC approval CCC approval / marking not required for products rated
36 V

Adjustment range 100 ... 1000 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated visible red light
Polarization filter no
Diameter of the light spot approx. 75 mm at a distance of 1000 mm
Angle of divergence approx. 2 °
Optical face frontal
Ambient light limit EN 60947-5-2:2007+A1:2012
Functional safety related parameters
MTTFd 860 a
Mission Time (T
M) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green: power on
Function indicator LED yellow, lights up with receiver lit
Control elements sensitivity adjustment
Control elements Light-on/dark-on changeover switch
Electrical specifications
Operating voltage UB 10 ... 30 V DC
Ripple max. 10 %
No-load supply current I
0 < 20 mA
Switching type The switching type of the sensor is adjustable. The default setSwitching current max. 100 mA
Voltage drop U
d 1.5 V DC
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection IP67
Connection Male connector M8 x 1 , 4-pin
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 10 g
EMC Directive 2004/108/EC EN 60947-5-2
Standard conformity
Standards UL 60947-5-2