Ürünler

PEPPERL+FUCHS DK20-9,5-110-124 KONTRAST FOTOSELİ

Technical Data

General specifications
Sensor range 9.5 mm ± 3 mm
ted
Teach-In operation: flashing slowly
alarm display: flashing quickly, if no safe operation is possible
Control elements Teach-In key
Electrical specifications
Operating voltage UB 10 ... 30 V DC
Ripple 10 %
No-load supply current I
0 70 mA
Input
Function input Teach-In input
Output
Switching type light/dark on switchable, results from the order of the Teach-In
Signal output Push-pull output, short-circuit protected, reverse polarity protec
ted
Switching voltage PNP:
(+UB -2.5 V) , NPN: 1.5 V
Compliance with standards and directi
ves
Standard conformity
Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007
Shock and impact resistance IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistance IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z
directions
Approvals and certificates


Light source LED
Light type Visible green/red/blue, modulated light
Light spot representation 1 mm x 4 mm
Angle deviation max. ± 3°
Ambient light limit
Continuous light 7000 Lux
Teach-In static Teach-In
Functional safety related parameters
MTTFd 650 a
Mission Time (T
M) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Function indicator LED yellow; switching operation: lights up if print mark is detecSwitching current max. 200 mA
Switching frequency f 16.5 kHz
Response time 30
µs
Ambient conditions
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Storage temperature -20 ... 75 °C (-4 ... 167 °F)
Mechanical specifications
Degree of protection IP67
Connection 5-pin, M12 x 1 connector
Material
Housing PC (glass-fiber-reinforced Makrolon)
Optical face glass
Mass 200 g
UL approval cULus Listed , Class 2 power source
CCC approval CCC approval / marking not required for products rated
36 V